ZyXEL ES-3148 Guida Utente

Chapter 4 The Web Configurator

ES-3148 User’s Guide

After you log in for the first time, it is recommended you change the default administrator 
password. Click Management > Access Control > Logins to display the next screen.

Figure 17   Change Administrator Login Password 

When you are done modifying the settings in a screen, click Apply to save your changes back 
to the run-time memory. Settings in the run-time memory are lost when the Switch’s power is 
turned off.
Click the Save link in the upper right hand corner of the web configurator to save your 
configuration to nonvolatile memory. Nonvolatile memory refers to the Switch’s storage that 
remains even if the Switch’s power is turned off. 

Syslog

This link takes you to screens where you can setup system logs and a system log 

server.

Cluster 

Management

This link takes you to a screen where you can configure clustering management 

and view its status.

MAC Table

This link takes you to a screen where you can view the MAC addresses (and types) 

of devices attached to what ports and VLAN IDs.

ARP Table

This link takes you to a screen where you can view the MAC addresses – IP 

address resolution table.

Configure Clone

This link takes you to a screen where you can copy attributes of one port to other 

ports. 

Table 6   Navigation Panel Links  (continued)