ZyXEL ES-3148 Guida Utente

Chapter 4 The Web Configurator

ES-3148 User’s Guide

3 When you see the message “

Press any key to enter Debug Mode within 3 

seconds ...

” press any key to enter debug mode.

4 Type 

atlc

 after the “

Enter Debug Mode

” message.

5 Wait for the “

Starting XMODEM upload

” message before activating XMODEM 

upload on your terminal.

6 After a configuration file upload, type 

atgo

 to restart the Switch.

Figure 18   Resetting the Switch: Via the Console Port 

The Switch is now reinitialized with a default configuration file including the default 
password of “1234”.

Click Logout in a screen to exit the web configurator. You have to log in with your password 
again after you log out. This is recommended after you finish a management session for 
security reasons.

Figure 19   Web Configurator: Logout Screen 

Bootbase Version: V0.6 | 03/06/2006 09:21:13
RAM:Size = 32 Mbytes
DRAM POST: Testing: 32768K OK
DRAM Test SUCCESS !
FLASH: Intel 32M

ZyNOS Version: 3.70(AID.0)b0 | 4/28/2006 17:27:36

Press any key to enter debug mode within 3 seconds.
.................................
Enter Debug Mode

Switch> atlc
Starting XMODEM upload (CRC mode)....
CCCCCCCCCCCCCCCC
Total  262144 bytes received.
Erasing..
................................................................
OK
Switch> atgo