ZyXEL ES-3148 Guida Utente
ES-3148 User’s Guide
63
C
H A P T E R
5
Initial Setup Example
This chapter shows how to set up the Switch for an example network.
5.1 Overview
The following lists the configuration steps for the initial setup:
• Create a VLAN
• Set port VLAN ID
• Configure the Switch IP management address
• Set port VLAN ID
• Configure the Switch IP management address
5.1.1 Creating a VLAN
VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can
do this with port-based VLAN or tagged static VLAN with fixed port members. In this
example, you want to configure port 1 as a member of VLAN 2.
do this with port-based VLAN or tagged static VLAN with fixed port members. In this
example, you want to configure port 1 as a member of VLAN 2.
Figure 20 Initial Setup Network Example: VLAN
1 Click Advanced Application > VLAN > Static VLAN.
ex
ample
exa
mple