ZyXEL 793H Guida Utente

Chapter 6 LAN Setup

P-793H User’s Guide

This table allows you to assign IP addresses on the LAN to specific individual computers 
based on their MAC Addresses. 
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address 
is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 
00:A0:C5:00:00:02.
Use this screen to change your ZyXEL Device’s static DHCP settings. Click Network > LAN 
> Client List. The screen appears as shown.

Figure 41   LAN > Client List

The following table describes the labels in this screen.

Primary DNS Server
Secondary DNS 

Server

This field is not available when you set DHCP to Relay.
Enter the IP addresses of the DNS servers. The DNS servers are passed to the 

DHCP clients along with the IP address and the subnet mask.
If the fields are left as 0.0.0.0, the ZyXEL Device acts as a DNS proxy and 

forwards the DHCP client’s DNS query to the real DNS server learned through 

IPCP and relays the response back to the computer.

Apply

Click Apply to save your changes back to the ZyXEL Device.

Cancel

Click Cancel to begin configuring this screen afresh.

Table 26   LAN > DHCP Setup (continued)

Table 27   LAN > Client List

IP Address

Enter the IP address that you want to assign to the computer on your LAN with 

the MAC address specified below.
The IP address should be within the range of IP addresses you specified in the 

DHCP Setup for the DHCP client.

MAC Address

Enter the MAC address of a computer on your LAN.

Add

Click Add to add a static DHCP entry. 

#

This is the index number of the static IP table entry (row).

Status

This field displays whether the client is connected to the ZyXEL Device.

Host Name 

This field displays the computer host name.

IP Address

This field displays the IP address relative to the # field listed above.