ZyXEL 793H ユーザーガイド
Chapter 6 LAN Setup
P-793H User’s Guide
100
6.5 LAN Client List
This table allows you to assign IP addresses on the LAN to specific individual computers
based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
Use this screen to change your ZyXEL Device’s static DHCP settings. Click Network > LAN
> Client List. The screen appears as shown.
based on their MAC Addresses.
Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address
is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02.
Use this screen to change your ZyXEL Device’s static DHCP settings. Click Network > LAN
> Client List. The screen appears as shown.
Figure 41 LAN > Client List
The following table describes the labels in this screen.
Primary DNS Server
Secondary DNS
Secondary DNS
Server
This field is not available when you set DHCP to Relay.
Enter the IP addresses of the DNS servers. The DNS servers are passed to the
Enter the IP addresses of the DNS servers. The DNS servers are passed to the
DHCP clients along with the IP address and the subnet mask.
If the fields are left as 0.0.0.0, the ZyXEL Device acts as a DNS proxy and
If the fields are left as 0.0.0.0, the ZyXEL Device acts as a DNS proxy and
forwards the DHCP client’s DNS query to the real DNS server learned through
IPCP and relays the response back to the computer.
Apply
Click Apply to save your changes back to the ZyXEL Device.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 26 LAN > DHCP Setup (continued)
LABEL
DESCRIPTION
Table 27 LAN > Client List
LABEL
DESCRIPTION
IP Address
Enter the IP address that you want to assign to the computer on your LAN with
the MAC address specified below.
The IP address should be within the range of IP addresses you specified in the
The IP address should be within the range of IP addresses you specified in the
DHCP Setup for the DHCP client.
MAC Address
Enter the MAC address of a computer on your LAN.
Add
Click Add to add a static DHCP entry.
#
This is the index number of the static IP table entry (row).
Status
This field displays whether the client is connected to the ZyXEL Device.
Host Name
This field displays the computer host name.
IP Address
This field displays the IP address relative to the # field listed above.