Affirmative 7375 Guida Utente
YEStablet 7375 User Guide
Registries Save/Restore
This is somewhat of a misnomer, since you can only save from this utility. But saving is very important, because
parameter changes in the Control Panel or in applications will not be saved after a Cold Boot unless you carry
out a Save Current Settings operation in this window.
parameter changes in the Control Panel or in applications will not be saved after a Cold Boot unless you carry
out a Save Current Settings operation in this window.
.
The procedure is:
1. Check the Save Current Settings box.
2. Click OK in the resulting Message box.
3. Wait several seconds, and then click OK in the “finished” Message box.
4. Click OK in the Registries Save/Restore window.
A Registry Save will also occur automatically if the 7375 is operating on battery power and reaches the end of the
battery life
2. Click OK in the resulting Message box.
3. Wait several seconds, and then click OK in the “finished” Message box.
4. Click OK in the Registries Save/Restore window.
A Registry Save will also occur automatically if the 7375 is operating on battery power and reaches the end of the
battery life
Remote Manager Setting.
This utility is not supported at this time. But remote central administration is available using Affirmative Computer
Products’ YESmanager, which is not dependent upon this setting.
Products’ YESmanager, which is not dependent upon this setting.
Stylus
• Double-Tap. This tab controls the stylus double-click properties just like the Double-Click tab in
properties.
• Calibration. When a new, reset, or upgraded 7375 is first booted up, the Calibration Properties screen will
appear on top of the Windows Desktop. It is recommended that you take this opportunity to calibrate the action
point of the stylus relative to your eyesight; otherwise you will probably be frustrated when trying to control
stylus action such as tapping or cursor placement. But you can also recalibrate at any time from this utility.
Click on the Recalibrate button and, when you are prompted, use the stylus to tap where indicated on the
touchscreen in accordance with the displayed instructions.
point of the stylus relative to your eyesight; otherwise you will probably be frustrated when trying to control
stylus action such as tapping or cursor placement. But you can also recalibrate at any time from this utility.
Click on the Recalibrate button and, when you are prompted, use the stylus to tap where indicated on the
touchscreen in accordance with the displayed instructions.
System
• General. You will see information on operating system, processor, memory, and the hardware currently
installed in the PCMCIA and CompactFlash slots.
• Memory. Adjust the allocation of unused RAM by moving the arrow to right or left.
• Device Name.
o
Device ID. This is a unique identifier which never changes for this hardware device.
o
Device Name. It is recommended that you enter a unique name here. This name identifies your 7375 to
other devices on the network and to the YESmanager remote central management software. Some
YESmanager features require unique device names.
YESmanager features require unique device names.
o
Device Description. Ignore this entry.
• About. This tab displays the current firmware version (OS) and the version of some of the installed
applications. You will need the firmware version if you wish to get technical support from Affirmative
Computer Products.
Computer Products.
Update
This utility is used to update the tablet firmware. See
OPERATION NOTES|Firmware Update
for more
information.
Wireless Network Card
This icon provides access to two Cisco utilities, and is present even if there is no Cisco wireless adapter card
installed.
installed.
12