Affirmative 7375 Guida Utente

YEStablet 7375 User Guide

Low Battery Condition
A warning message will be generated during a Low Battery situation and the 7375 will shortly thereafter be placed
into (Forced) Suspend mode if operation continues without external supply of power.

After the 7375 enters the (Forced) Suspend mode due to the Low Battery condition:

• The Suspend/Resume button will not be able to reactivate the machine unless an AC-DC adapter or a good

external battery is connected when the Suspend button is briefly engaged. If recovery is performed within 2-4
hours, the machine will return to its previous state.

• CAUTION: If over 2-4 hours elapse without using the AC-DC adapter or the external battery pack to resume

system operation or recharge the battery, the battery power will drain entirely. If the 7375 is re-activated
then, the machine is reset and the process amounts to a Cold Boot. Reactivation of the system is also by
means of briefly engaging the Suspend button in the presence of a connected AC-DC adapter or good
external battery.

SUMMARY
Use the Suspend button to:
1.  Enter and Exit Suspend mode (triggered upon button release within 0-4 seconds);
2.  Engage Full Power Off (preceding Cold boot) by pressing/holding for over 4 seconds;
3.  Exit Forced Suspend mode;

• Note: The tablet automatically enters Forced Suspend mode (from Active or Suspend) when the internal

battery pack reaches a low level. This supports a graceful shutdown and also extends the time where
information is retained in volatile memory.

• Connect the AC-DC adapter or external battery pack of good capacity to the 7375 and briefly engage the

Suspend button (recover original state entering Suspend/Forced Suspend).

4. Cold boot (from Power off or Total battery drain).

• Connect AC-DC adapter or an external battery pack of good capacity to the 7375 and briefly engage the

Suspend button (splash screen will appear after a few seconds - Cold (Re-)Boot has taken place).

NOTE: States (3) and (4) are manifested by "dark display and dark LEDs with no system response when the

Suspend button is pushed without an AC-DC adapter connected to the 7375".

The next step is to connect up the AC-DC and engage the Suspend button again.
The type of response – splash (bootup) screen or recovery into previous state - indicates whether the tablet
is undergoing Cold (Re-)Boot or is simply exiting Forced Suspend mode.

System Tray Functions

The System Tray is seen at the right end of the Task Bar, just like on a standard Windows PC. It contains icons that
are short cuts to certain functions. Single or double-click on the icon, as explained below, to invoke the function.
The standard System Tray has six functions:

• Virtual Keyboard. This icon looks like a keyboard with a stylus on top of it. A single click provides a choice

of a virtual numeric pad or two types of PC keyboards. The Keyboard choice is the default and is typically the
most useful in a YESterm IP emulation session.

• Desktop. This icon looks like a monitor screen. A single click minimizes the current window and reveals the

Desktop.

• Date/Time. The current time is displayed. A double click invokes the same utility to set date and time as the

Date/Time icon in Control Panel.

• Power Properties. This icon looks like an AC power plug. A double click invokes the same utility as the

Power icon in Control Panel.

• Mouse Right Click. This icon looks like a mouse. A single click invokes a similar icon on the lower right

corner of the desktop. The next tap of the stylus will be interpreted as a mouse right-click.

• Wireless Adapter Connection. This appearance of this icon varies depending upon the type of wireless

adapter in the 7375. A double click invokes IP address and adapter connection information.