Garmin 4008 Guida Utente

Using Charts

To change the Navigation chart settings from the Home screen, select 

 > 

 > 

 > 

.

Photos—sets the high-resolution satellite images to off, land only, or blend. High-resolution satellite 

imagery is only available while using a BlueChart g2 Vision SD card. 
tides/Currents—turns the display of tides and currents on or off (

).

Service Points—turns the display of marine service points on or off.
Roses—displays a compass rose around your boat, indicating compass direction. True wind or 

apparent wind direction can be displayed if the unit is connected to a compatible marine wind sensor.

Data Bars—show or hide cruising, navigation, fishing, fuel, or sailing numbers.

Cruising—turn the GPS Speed, GPS Heading, Depth, and GPS Position data bar on or off. 

Select 

 to configure the position of the data on the screen.

Navigation—turn the Distance to Destination, Arrival, Off Course, and Bearing data bar on or 

off. If you select Auto, the chartplotter will turn the Navigation data bar on whenever you are 

navigating to a destination. Select 

 to configure the Route Leg, Next Turn, and 

Destination options.
Fishing—turn the Depth, Water Temperature, and Water Speed data bar on or off.
Fuel—turn the Fuel Rate, Remaining Fuel, Range, and Fuel Economy data bar on or off.
Sailing—turn the Water Speed, Wind Speed, Wind Angle, and Wind Velocity Made Good (VMG) 

data bar on or off. Select 

 to toggle between True and Apparent wind speed and wind angle.