Garmin 4008 Guida Utente

Getting Started

Your unit supports Secure Digital (SD) cards. Insert optional BlueChart

®

 g2 Vision

®

 SD cards to 

view high-resolution satellite imagery, and aerial reference photos of ports, harbors, marinas, and 

other points of interest. Insert blank SD cards to transfer data such as waypoints, routes, and tracks 

to another compatible Garmin unit or a computer. The SD card slot is located on the lower-right 

corner of the unit.
To insert the SD card, open the access door and press the SD card in until it clicks. Press the card in 

again and release it to eject it from the chartplotter.

You can restore your unit to the original factory settings.

  CAUtION: This procedure deletes any information you have entered.

1.  From the Home screen, select 

 > 

 > 

.

2.  Select 

.

3.  Select 

 to restore all factory settings or select 

 to cancel.

You can view the software version, basemap version, and unit ID number for your chartplotter. 

You may need this information to update the system software or to purchase additional map data 

information.

From the Home screen, select 

 > 

 > 

.

Simulator Mode turns the GPS receiver off for use indoors or for practice. The unit does not track 

satellites in simulator mode.

  CAUtION: Do not try to navigate using Simulator Mode because the GPS receiver is turned off. Any 

satellite signal strength bars shown are only simulations and do not represent the strength of actual 

satellite signals.

1.  From the Home screen, select 

 > 

 > 

 > 

.

2.  Select 

 to set speed, track control, position, simulator time, and simulator date.