Garmin 530w Guida Utente

152

trolled airspace are also sectorized to provide complete 
information on any nearby airspace. Once one of the 
described conditions exists, the message annunciator 
flashes, alerting you of an airspace message (if airspace 
alert messages are enabled). See Sec 9 - Aux - Setup 1 
- CDI / Alarms for more information. 

1.  When  the  message  annunciator  above  the 

MSG key flashes, press MSG. 

2.  Press  MSG  again  to  return  to  the  previous 

page. 

Once you have been provided an airspace alert 

message, detailed information concerning the specific 
airspace is provided on the Nearest Airspace Page. 
The Nearest Airspace Page displays the airspace name, 
status (“Ahead”, “Ahead < 2nm”, etc. as described on 
the previous page), and a time to entry (if applicable). 
By selecting any airspace name listed on the Nearest 
Airspace Page, additional details are provided — 
including controlling agency, communication frequen-
cies and floor/ceiling limits. 

1.  Select the Nearest Airspace Page. 

2.  Press  the  small  right  knob  to  activate  the 

cursor. 

3.  Turn the large right knob to scroll through 

the list, highlighting the desired airspace. 

4.  Press ENT to display the Airspace Information 

Page for the selected nearby airspace. 

5.  To return to the Nearest Airspace Page, verify 

that “Done?”  is  highlighted  by  the  flashing 
cursor and press ENT. 

6.  Press  the  small  right  knob  to  remove  the 

flashing cursor. 

Nearest Airspaces