Garmin 2006 Manuale Proprietario

M

AIN

 M

ENU

 > 

A

LARMS

 T

AB

Use the Alarms tab to define alarm settings. The Alarms tab is divided into three 

sub tabs: System, Nav, and Sonar. 
Alarm messages appear in red across the status bar or change the appearance of 

a data field if that field shows alarm-related data (for example, depth or voltage). 

Press QUIT to acknowledge an alarm message. The status bar and data field 

remain red while the alarm condition persists.

1.  Use the 

ROCKER to highlight the System, Nav, or Sonar sub tab.

2.  Highlight the field next to the alarm you want to set, and press 

ENTER. 

3.  Change the mode to the setting you want, and press 

ENTER. 

4.  Repeat steps 1–3 to set additional alarms, and then press 

ENTER when 

finished.

Use the System sub tab to set alarms for the system clock, batteries, and GPS 

accuracy.

The System sub tab contains the following alarms:

•  Clock—provides an alarm for the system clock. Enter a time in the time 

field and turn the alarm on and off from the control field menu. Remember 

to enter alarm times in the same time format (UTC or local) you are using 

for your system. The unit must be on for the clock alarm to work.

•  Battery—sets an alarm to sound when the battery reaches a user-

determined low voltage.

•  GPS Accuracy—sets an alarm to sound when the GPS location accuracy 

falls outside the user-determined value.