Garmin 2006 Manuale Proprietario

M

AIN

 M

ENU

 > 

A

LARMS

 T

AB

Use the Nav sub tab to set navigational alarms, including anchor drag, arrival, and 

off course.

•  Anchor Drag—sets an alarm to sound when a specified drift distance is 

exceeded. Enter a value in the distance field, and use the control field to 

turn the alarm on and off.

•  Arrival—sets an alarm to sound when a specified distance or time away 

from a destination waypoint is exceeded. Enter a distance, radius, or time 

for sounding the alarm, and use the control field to set the alarm to Off, 

Dist (distance), or Time. 

•  Off Course—sets an alarm to sound when you are off course by a specific 

distance. Enter a distance in the distance field, and use the control field to 

turn the alarm on and off.

Use the Sonar sub tab to set sonar alarms, including shallow or deep water,  

water temperature, and fish.

•  Shallow Water/Deep Water—sets an alarm to sound when you enter 

an area of specified depth that is too shallow or too deep. You must be 

receiving sonar data for this function to work.

•  Water Temperature—sets an alarm to sound when the transducer reports 

a temperature either above, below, inside, or outside the specified values.

•  Fish —sets an alarm to sound when the unit detects a fish of the specified 

symbols.

*You must be receiving NMEA sonar data or using a GSD 20, GSD 21 or GSD 22 for the 

sonar alarms to function.