Garmin 225 Manuale Proprietario

C

10

The active destination waypoint is displayed at the top of the screen, with

the ETE (estimated time enroute) and ETA (estimated time of arrival) based on
your present speed and course at the bottom.

The distance and bearing to the first route waypoint, along with your cur-

rent speed and course over ground (SOG and COG), are indicated along the
right-hand side of the screen. The SOG and COG fields can be changed to 
display velocity made good (VMG) and turn (TRN). To toggle the speed and
course displays, press the 

B

key.

Now enter a speed of 60 knots for our simulated trip:

1. Press the SOG/COG softkey to display the Simulator SOG/COG window.

2. Press the 

C

key to begin data entry.

3. Use the 

K

keypad to enter a speed of 60 knots, pressing the 

C

key after

each character entry.

4. Once you’ve entered your speed, press the EXIT softkey.

By leaving the COG field value at the default setting, the GPSMAP system

will automatically set a direct course to each route waypoint. If you choose to
enter your own course, highlight the COG field and enter the desired course.
To reset the simulator to automatically steer a direct course for you, highlight
the ‘Reset COG to Nav Course’ prompt and press the 

C

key.

At the bottom right corner of the highway display is the highway scale. The

highway scale ranges from ‘1X’ to ‘16X’, and allows you to change the 
perspective view of the highway to show a larger or smaller area.

1. Press the down arrow on 

L

to decrease the scale and show a smaller area. 

2. Press the up arrow on 

L

to increase the scale and show a larger area.

215225manb.qxd  4/27/00  9:22 AM  Page 10