Garmin 2820 Manuale Proprietario

A

PPENDIX

2820. By registering, you will receive notification of software and 

map updates. 

You can use the permanent or temporary adhesive disks or the non-

skid friction mount to install the StreetPilot in your vehicle.

1.  Clean and dry the area where you want to place the mount.
2.  Remove one side of the backing from the adhesive and 

place the adhesive on the bottom of the mounting base.

3.  Place the mounting base so the locking lever is facing you 

and then position the base on the cleaned area. Apply 

pressure to adhere the base to the dashboard. 

  NOTE: The permanent adhesive disk is extremely difficult 

to remove. Only install if you are sure you want to leave the 

mount in that location. 

1.  Align the power plug on the vehicle adapter to the connector 

and slide the plug until fully seated.

2.  Slide the locking lever on the mounting base to the left 

(unlocked).