ATSI dbd24-2085-01s Guida Utente

1.  Create a folder on the USB flash drive at the root level named Cognitive. 

2.  Inside the Cognitive folder create a folder named Objects. 

3.  Place the desired Stored Label Formats or Menuing Program into the 

Objects folder. 

4.  Turn the printer on and verify the POWER and READY lights are green. 

5.  Insert the USB flash drive into the USB A port on the back of the printer.  

The READY light will flash red during firmware installation.   

6.  When READY light remains solid green, turn the printer off and remove the 

USB Flash Drive. 

 THE PRINTER WILL LOAD THE OBJECTS FILES IN ALPHABETICAL ORDER. FOR 

MORE INFORMATION ON CREATING STORED LABEL FORMATS OR MENUING PROGRAMS 
PLEASE REFERENCE THE COGNITIVE CPL PROGRAMMERS GUIDE.