Bizfon 2000 Guida Utente
Bizfon Manual II: Administrator's Guide
Administrator’s Menus
Bizfon2000 and Bizfon4000 (SW Version 4.1.x)
29
Enable SNMP v1 / 2c Read-Write Access checkbox additionally enables a read-write access on the Bizfon for the SNMP monitoring application.
With this checkbox enabled, administrator will be able to remotely configure the Bizfon via SNMP administrating program.
With this checkbox enabled, administrator will be able to remotely configure the Bizfon via SNMP administrating program.
SNMP v1 / v2c Read-Write Community text field is used to insert the community description (public, private, etc.) for the read-write management
(like gathering information (events, statistics, etc.) about Bizfon’s and remotely changing Bizfon’s configuration). Field may contain some kind of
password which should be matching both on Bizfon and on the administrating application for successful SNMP management.
(like gathering information (events, statistics, etc.) about Bizfon’s and remotely changing Bizfon’s configuration). Field may contain some kind of
password which should be matching both on Bizfon and on the administrating application for successful SNMP management.
SNMP Trap Settings are used to define the traphosts that
should be informed when certain events occur on the Bizfon. For
the listed traphosts to be informed about the events on the
Bizfon, Send SNMP Trap action should be configured for the
corresponding event(s) from the
should be informed when certain events occur on the Bizfon. For
the listed traphosts to be informed about the events on the
Bizfon, Send SNMP Trap action should be configured for the
corresponding event(s) from the
page.
SNMP Trap Settings page contains a list of all configured
traphosts with the referring information.
traphosts with the referring information.
Fig. II-49: SNMP Trap Settings page
Add functional button is used to add a new traphost to the table
and opens Add SNMP Traphost page where the new traphost
might be defined. Page consists of the following components:
and opens Add SNMP Traphost page where the new traphost
might be defined. Page consists of the following components:
Traphost text field requires an IP address or the host name of
the traphost. Administrating application’s host address should be
inserted here.
the traphost. Administrating application’s host address should be
inserted here.
Community text field requires community description (public,
private, etc.) for the administrating application to accept the
notifications about the certain events on the Bizfon. Field may
contain some kind of password which should be the same both
on Bizfon and on the administrating application for successful
SNMP management.
private, etc.) for the administrating application to accept the
notifications about the certain events on the Bizfon. Field may
contain some kind of password which should be the same both
on Bizfon and on the administrating application for successful
SNMP management.
A group of radio buttons is used to select the SNMP protocol
version used for events notifications delivered by the Bizfon to
the administrating application.
version used for events notifications delivered by the Bizfon to
the administrating application.
Fig. II-50:Add SNMP Traphost page
Diagnostics
The System Diagnostic page gives a possibility of running Network and WAN protocol diagnostics to verify Bizfon's connectivity and to download all
system logs for possible problems recovery.
system logs for possible problems recovery.
The Start Detecting WAN Protocol button is used to initiate WAN diagnostics that will detect the WAN IP configurations: static or through DHCP
and PPP servers. For static WAN IP configuration, gateway availability is checked. When acting as a client, DHCP and PPP servers' accessibilities
are being verified.
and PPP servers. For static WAN IP configuration, gateway availability is checked. When acting as a client, DHCP and PPP servers' accessibilities
are being verified.
The Start Network Diagnostics button is used to initiate network
diagnostics, i.e., to check the WAN link and IP configuration, to
verify gateway, DNS primary and secondary (if configured) servers'
accessibilities.
diagnostics, i.e., to check the WAN link and IP configuration, to
verify gateway, DNS primary and secondary (if configured) servers'
accessibilities.
The field below will display the diagnostics results and the
connectivity conditions. The system should be reconfigured if
problems occur during the diagnostics.
connectivity conditions. The system should be reconfigured if
problems occur during the diagnostics.
The Reboot this Device button is used to reboot the Bizfon.
Please note that the session with the Bizfon will be closed, i.e., the
Bizfon GUI should be newly opened and a new login will be
required afterwards.
Please note that the session with the Bizfon will be closed, i.e., the
Bizfon GUI should be newly opened and a new login will be
required afterwards.
Fig. II-51: System Diagnostic page
Show Call Bandwidth Usage link leads to the Call Bandwidth Statistics page where a chart with call traffic bandwidth usage per day/hour basis
can be built.