Bizfon 2000 Guida Utente
Bizfon Manual II: Administrator's Guide
Administrator’s Menus
Bizfon2000 and Bizfon4000 (SW Version 4.1.x)
30
Call Bandwidth Statistics page allows you to see the bandwidth
used at the moment of maximum incoming and outgoing call traffic
for the certain time frame. It will give you an idea whether the
upload and download bandwidth configured from
used at the moment of maximum incoming and outgoing call traffic
for the certain time frame. It will give you an idea whether the
upload and download bandwidth configured from
is enough or some calls will be denied in a
high load periods.
Initially, this page consists of the following components:
Traffic range of statistic table drop down list is used to select the
time interval (from 1 to 90 days) to display the corresponding
statistics for.
time interval (from 1 to 90 days) to display the corresponding
statistics for.
Show button is used to generate a call bandwidth statistics chart.
When this button is pressed, a colored chart appears on this page
indicating how much bandwidth has been used at the peak of
receive and transmit call traffic on the Bizfon. The K letter used for
the bandwidth indicates the thousand.
When this button is pressed, a colored chart appears on this page
indicating how much bandwidth has been used at the peak of
receive and transmit call traffic on the Bizfon. The K letter used for
the bandwidth indicates the thousand.
Fig. II-52: Call Bandwidth Statistics page
Automatic Provisioning
Automatic Provisioning provides the possibility to automatically
configure the WAN network settings of Bizfon. This is very useful
when the administrator is not actually aware about the Bizfon’s
network settings. Automatic Provisioning automatically detects
the matching network configuration settings, applies them on the
Bizfon, thus connecting the device to the internet through the
available ISP connection.
configure the WAN network settings of Bizfon. This is very useful
when the administrator is not actually aware about the Bizfon’s
network settings. Automatic Provisioning automatically detects
the matching network configuration settings, applies them on the
Bizfon, thus connecting the device to the internet through the
available ISP connection.
Please Note:
Automatic Provisioning can only be run from the
LAN side of the Bizfon, i.e. from the PC connected to the Bizfon’s
LAN.
LAN.
Automatic Provisioning automatically detects and configures the
following settings on the Bizfon:
following settings on the Bizfon:
•
WAN interface type (PPPoE or Ethernet)
•
WAN IP settings
•
PPP settings
•
ISP settings
•
DHCP settings
•
DNS settings
•
NAT Traversal settings
Fig. II-53: Auto Provisioning page