Bizfon 2000 Guida Utente
Bizfon Manual II: Administrator's Guide
Administrator’s Menus
Bizfon2000 and Bizfon4000 (SW Version 4.1.x)
35
Fig. II-63: Extensions Management page
The following columns are present in the table:
•
Extension - lists user or attendant extensions on the Bizfon. This number is used for internal PBX calls.
•
Display Name - indicates an optional display name to identify the caller.
•
Attached Line - indicates the FXS or IP line corresponding extension it is attached to. “R” is displayed in this column when SIP Remote
Extension (see below) functionality is enabled on the extension.
Extension (see below) functionality is enabled on the extension.
•
SIP Address - displays the SIP address of the corresponding extension. The column displays the full SIP address, (i.e.,
username@sipserver:port) when the Registration on SIP Server checkbox is selected. If registration is disabled, the SIP address will be
displayed in the following format: “username, Proxy: sipserver:port”. If no SIP registration server or SIP server port is defined, corresponding
information will not be included in this column. If no username is defined, the extension number will be displayed instead
username@sipserver:port) when the Registration on SIP Server checkbox is selected. If registration is disabled, the SIP address will be
displayed in the following format: “username, Proxy: sipserver:port”. If no SIP registration server or SIP server port is defined, corresponding
information will not be included in this column. If no username is defined, the extension number will be displayed instead
.
•
Percentage of System Memory - indicates the user space (in percentages) configured for each extension. The actual available duration (in
minutes) for the extension voice mails, uploaded/recorded greetings and blocking messages is also displayed here. The available minutes
corresponding to the selected user space are dependent on the Voice Recording codec selected from the
minutes) for the extension voice mails, uploaded/recorded greetings and blocking messages is also displayed here. The available minutes
corresponding to the selected user space are dependent on the Voice Recording codec selected from the
page. For example, for the same amount of marked out user space, selection of the G726 voice recording codec will provide more space for
voice mails and user defined voice greetings than the G711 codec selection.
voice mails and user defined voice greetings than the G711 codec selection.
•
Call Relay - indicates whether or not the the Call Relay option is enabled on the extension.
•
Codecs – column lists the short information (full information is seen in the tool tip) about extension specific voice Codecs. Extension
codec’s can be accessed and modified by clicking on the link of the corresponding extension’s Codecs. The link leads to the
codec’s can be accessed and modified by clicking on the link of the corresponding extension’s Codecs. The link leads to the
page
.
Clicking on each user extension in the Extensions table will open the extension specific Extension Settings menu. The Pickup Group, Call Park and
Paging Group extensions are displayed without a link in the Extensions Management table and extension pages. Additionally, the supplementary
services configuration pages will not be accessible for this type of extensions.
Paging Group extensions are displayed without a link in the Extensions Management table and extension pages. Additionally, the supplementary
services configuration pages will not be accessible for this type of extensions.