Bizfon 2000 Guida Utente
Bizfon Manual II: Administrator's Guide
Administrator’s Menus
Bizfon2000 and Bizfon4000 (SW Version 4.1.x)
79
1. Registration Settings
The Primary Server requires the IP address of the primary Radius
Server.
The Secondary Server requires the IP address of the secondary
Radius Server.
NAT Station IP text fields require the NAT PC WAN IP address. If
no NAT Station is specified here, Bizfon’s IP address will be sent
to the RADIUS server.
Secret Key is used to insert the secret key between the Radius
client and the server. Contact the Radius server administrator to
get the secret key for your Bizfon.
The Confirm Secret Key field is used to verify the secret key. If
the entered Secret Key does not correspond to the one in the
Confirm Secret Key field, the error message “The Secret Key
does not match. Please try again” will appear.
Retry Count allows you to select the number of attempts
authorized before canceling the registration.
Receive Timeout allows you to select the timeout (in seconds)
between two attempts to register.
Encoding Type allows you to select the encoding type (PAP or
CHAP) that should be unique on both the client and the server
sides for the establishment of a successful connection. Encoding
type should also be requested from the Radius Server
administrator.
The Authorization Port text field requires the port number on the
RADIUS server where Bizfon is to send the authentication
requests.
The Accounting Port text field requires the port number on the
RADIUS server where Bizfon is to send the accounting messages.
The Primary Server requires the IP address of the primary Radius
Server.
The Secondary Server requires the IP address of the secondary
Radius Server.
NAT Station IP text fields require the NAT PC WAN IP address. If
no NAT Station is specified here, Bizfon’s IP address will be sent
to the RADIUS server.
Secret Key is used to insert the secret key between the Radius
client and the server. Contact the Radius server administrator to
get the secret key for your Bizfon.
The Confirm Secret Key field is used to verify the secret key. If
the entered Secret Key does not correspond to the one in the
Confirm Secret Key field, the error message “The Secret Key
does not match. Please try again” will appear.
Retry Count allows you to select the number of attempts
authorized before canceling the registration.
Receive Timeout allows you to select the timeout (in seconds)
between two attempts to register.
Encoding Type allows you to select the encoding type (PAP or
CHAP) that should be unique on both the client and the server
sides for the establishment of a successful connection. Encoding
type should also be requested from the Radius Server
administrator.
The Authorization Port text field requires the port number on the
RADIUS server where Bizfon is to send the authentication
requests.
The Accounting Port text field requires the port number on the
RADIUS server where Bizfon is to send the accounting messages.
Fig. II-137: Radius Client Settings page
2. Authentication Settings
The Enable common login for all users in time of by Phone authentication checkbox enables custom settings for the callers who passed an
authorization by phone on the Bizfon. This checkbox enables Username and Password text fields to insert the custom settings that will stand
instead of the source caller’s settings when being delivered to the RADIUS server.
The Authentication on Destination RADIUS Server parameters group is used to insert a Username and a Password (followed by the password
confirmation) to pass authentication on the RADIUS Server of the destination Bizfon. If these fields are left empty, the original authentication settings
that users enter for authentication will be used.
3. Accounting Settings
The Username field is dedicated for accounting services only. It is used to insert an identification username for accounting purposes. When no
username is specified in this field, the source username will be used for accounting.
The Send Accounting messages manipulation radio buttons group is used to select sending both Start and Stop accounting messages or only
Stop accounting message.
Stop accounting message.
Voice Mail Common Settings
The Voice Mail Common Settings page is used to configure the Voice Mail recording codec and memory allocation for voice mails and user defined
system messages. Bizfon allows using USB flash memory devices for voice data files storage. USB flash memory devices are basically a portable
hard drive. Using flash memory, the USB flash device is compact, lightweight, durable and easy to use. It can be plugged into one of the available
USB ports on the Bizfon.
system messages. Bizfon allows using USB flash memory devices for voice data files storage. USB flash memory devices are basically a portable
hard drive. Using flash memory, the USB flash device is compact, lightweight, durable and easy to use. It can be plugged into one of the available
USB ports on the Bizfon.
Please Note
: The external USB flash memory capability is not available for Bizfon2000 model, therefore the Voice Mail Common Settings page will
only contain Recording Codec selection fro Bizfon2000 model.
This page offers the following components:
The Recording Codec drop down list contains the existing codecs for voice mail compression. Changing the Voice Mail recording codec will directly
affect the allocated memory size for users.
affect the allocated memory size for users.