Clavia electro 2 Guida Utente
3. Getting started: Using a Rotor Speed switch pedal
NORD ELECTRO 2 V3.0x
Page 14
• As a sustain pedal for Piano sounds and as a Rotor Speed switch for the Organ sounds (see Sustain
Pedal Configuration below)
S
ETTING
UP
THE
SUSTAIN
PEDAL
POLARITY
Set up the pedal polarity as follows:
1. Press the S
HIFT
+ P
ROGRAM
7 (PED.POL) but-
tons. The D
ISPLAY
reads ‘CL’ or ‘OP’.
2. Change sustain pedal polarity between ‘OP’
(Open) (open when pressed) and ‘CL’ (Closed)
(closed when pressed) with the U
(closed when pressed) with the U
P
/D
OWN
N
AVI
-
GATOR
buttons.
3. Press any button (except for the S
HIFT
, S
TORE
or U
P
/D
OWN
buttons) to exit.
S
ETTING
UP
THE
SUSTAIN
PEDAL
CONFIGURATION
1. Press the S
HIFT
+ P
ROGRAM
8 (CONFIG) but-
tons. The D
ISPLAY
reads ‘P.S’ (Pedal Sustain)
or ‘P.t’ (Pedal toggle).
1. Change sustain pedal functionality between
‘P.S’ (Sustain for both Piano and Organ sounds)
and ‘P.t’ (sustain for Piano sounds and Rotor
Speed switch for Organ sounds) with the U
and ‘P.t’ (sustain for Piano sounds and Rotor
Speed switch for Organ sounds) with the U
P
/
D
OWN
N
AVIGATOR
buttons.
2. Press any button (except for the S
HIFT
, S
TORE
or U
P
/D
OWN
buttons) to exit.
Nord Electro 2 sends and receives Sustain Pedal mes-
sages as MIDI (CC# 64). Note! If you have selected ‘P.t’, Rotor Speed selection is sent from the
sustain pedal as MIDI CC#82 - not CC#64!
sages as MIDI (CC# 64). Note! If you have selected ‘P.t’, Rotor Speed selection is sent from the
sustain pedal as MIDI CC#82 - not CC#64!
U
SING
A
R
OTOR
S
PEED
SWITCH
PEDAL
A foot switch connected to the R
OTOR
S
PEED
input can be used to switch between Slow and Fast rotor
speed for the Rotary Speaker effect (see
). Nord Electro 2 will also send and receive Rotor Speed
switch messages via MIDI (CC# 82).
Note: The Pedal Polarity setting that you made for the S
USTAIN
P
EDAL
input (see above) also
affects the R
OTOR
S
PEED
input.