Clavia electro 2 Guida Utente
NORD ELECTRO 2 V3.0x
3. Getting started: Using a control (expression) pedal
Page 15
U
SING
A
CONTROL
(
EXPRESSION
)
PEDAL
As indicated in the illustration on
, a regular resistive (range 10 kOhm to 50 kOhm) expression pedal
can be connected to the C
ONTROL
P
EDAL
input, using a stereo (Tip-Ring-Sleeve) cable. The connected
pedal can be used to control either Organ Swell (the characteristic B3 volume control) or Wah-Wah mod-
ulation. Pedals like the Roland EV-5 and control/expression pedals from Proel works well with the Electro
2. Control pedals from Yamaha have different characteristics and are not suitable for use with the Electro
2. Nord Electro 2 will also send and receive Expression pedal messages via MIDI (CC# 11).
ulation. Pedals like the Roland EV-5 and control/expression pedals from Proel works well with the Electro
2. Control pedals from Yamaha have different characteristics and are not suitable for use with the Electro
2. Nord Electro 2 will also send and receive Expression pedal messages via MIDI (CC# 11).
B
ASIC
MIDI
SETTINGS
If you are controlling the Nord Electro 2 from an external MIDI keyboard, the Nord Electro 2 must be set
to receive on the same MIDI channel that the external keyboard transmits on. Nord Electro 2 is monotim-
bral (or bitimbral when using the Organ section.See
to receive on the same MIDI channel that the external keyboard transmits on. Nord Electro 2 is monotim-
bral (or bitimbral when using the Organ section.See
) which means it can only transmit and receive on one MIDI channel at a time.
1. Set the MIDI keyboard to transmit and receive on MIDI Channel 1. (This is the default setting
when Nord Electro 2 is shipped from factory).
2. Press the S
HIFT
+ P
ROGRAM
1 (MIDI CH) but-
tons. The D
ISPLAY
shows the currently selected
MIDI channel.
3. Scroll with the U
P
/D
OWN
N
AVIGATOR
buttons to
select MIDI Channel 1 (if it isn’t already
selected).
selected).
4. Press any button (except for the S
HIFT
, S
TORE
or
U
P
/D
OWN
buttons) to exit.