Clavia electro 2 Guida Utente
NORD ELECTRO 2 V3.0x
4. Editing Programs: Reverting to the original Program
Page 17
S
ELECTING
INSTRUMENT
(O
RGAN
OR
P
IANO
)
No matter what Program you’re editing, you could always select a dif-
ferent instrument type at any time. There are two main instrument
sections in Nord Electro 2: the Organ section and the Piano section.
You switch between these sections by pressing the I
ferent instrument type at any time. There are two main instrument
sections in Nord Electro 2: the Organ section and the Piano section.
You switch between these sections by pressing the I
NSTRUMENT
S
E
-
LECT
button located between the Organ and Piano sections. When
you have selected an instrument section the other section, with its sub
groups, is automatically disabled (all its LEDs go blank). However, all
settings of the respective groups are memorized so when you switch
back, all parameter values of the instrument group are automatically recalled. The parameters of the Effects
section will always remain unaffected when you switch instrument group.
groups, is automatically disabled (all its LEDs go blank). However, all
settings of the respective groups are memorized so when you switch
back, all parameter values of the instrument group are automatically recalled. The parameters of the Effects
section will always remain unaffected when you switch instrument group.
R
EVERTING
TO
THE
ORIGINAL
P
ROGRAM
If you have edited a Program and want to revert to the stored original, just press the corresponding P
RO
-
GRAM
button again.
S
TORING
A
P
ROGRAM
Storing a Program will permanently overwrite the existing Program in the selected memory location. Be
careful so that you don’t accidentally erase a Program you’d like to keep!
careful so that you don’t accidentally erase a Program you’d like to keep!
Note! When Nord Electro 2 is shipped from factory, Memory Lock is set to ‘On’. To be able to
store Programs, first disable the Memory Lock function. See
store Programs, first disable the Memory Lock function. See
To store a Program do like this:
1. Press the S
TORE
button once. The Bank and Program number
starts flashing in the D
ISPLAY
2. Select Bank (A-F) by pressing the U
P
/D
OWN
N
AVIGATOR
but-
tons (if you want to change Bank) and then Program location
by pressing the corresponding P
by pressing the corresponding P
ROGRAM
button (1-8). As you
scroll through the memory locations, you can play and hear the Program currently shown in the
D
D
ISPLAY
. This prevents you from overwriting a sound that you want to keep. (To cancel the
operation, press any button, except for the S
HIFT
, P
ROGRAM
, S
TORE
or U
P
/D
OWN
buttons.)
3. Press S
TORE
again to store your Program. The D
ISPLAY
shows the selected memory location and
stops flashing.