Clavia electro 2 Guida Utente
5. Panel reference: System functions
NORD ELECTRO 2 V3.0x
Page 36
T
RANSPOSE
The Transpose function is global for all sounds in Nord Elec-
tro 2, i.e. changing it will affect all Programs. Press S
tro 2, i.e. changing it will affect all Programs. Press S
HIFT
+
P
ROGRAM
6 (TRANSPOSE) buttons. The D
ISPLAY
reads
‘0’. Press the U
P
/D
OWN
N
AVIGATOR
buttons to transpose
the sounds up or down in semitone steps. The range is +/- 6
semitones in steps of 1 semitone. Press any button (except for
the S
semitones in steps of 1 semitone. Press any button (except for
the S
HIFT
, S
TORE
or U
P
/D
OWN
buttons) to exit. Note that
the Transpose setting is not saved, so you will have to
reconfigure after power off.
reconfigure after power off.
Note: Due to the actual key range of the original Piano
instruments, the lowest keys may not produce any
sound when the instrument is transposed down. The
same goes for the highest keys when the instrument is
transposed up. For organ sounds, the Transpose function will only generate notes that are with-
in the 73-key note range of Nord Electro 2 73, i.e. F1-F7. This means that using the Transpose
function for Organ sounds in Nord Electro 2 73 will cause the lowest or highest notes of the key-
board to be silent.
instruments, the lowest keys may not produce any
sound when the instrument is transposed down. The
same goes for the highest keys when the instrument is
transposed up. For organ sounds, the Transpose function will only generate notes that are with-
in the 73-key note range of Nord Electro 2 73, i.e. F1-F7. This means that using the Transpose
function for Organ sounds in Nord Electro 2 73 will cause the lowest or highest notes of the key-
board to be silent.
P
ED
. P
OL
Press the S
HIFT
+ P
ROGRAM
7 (PED.POL) buttons to set
up the Sustain Pedal and Rotor Speed Pedal polarity. Change
pedal polarity between ‘OP’ (Open) (open when pressed) and
‘CL’ (Closed) (closed when pressed) with the U
pedal polarity between ‘OP’ (Open) (open when pressed) and
‘CL’ (Closed) (closed when pressed) with the U
P
/D
OWN
N
AVIGATOR
buttons. Press any button (except for the
S
HIFT
, S
TORE
or U
P
/D
OWN
buttons) to exit.
Nord Electro 2 sends and receives Sustain Pedal messages as
MIDI CC# 64 and Rotor Speed Pedal messages as MIDI
CC#82.
MIDI CC# 64 and Rotor Speed Pedal messages as MIDI
CC#82.
C
ONFIG
Press the S
HIFT
+ P
ROGRAM
8 (CONFIG) buttons once to
enter the Pedal Configuration function. Here you select how
you want to configure the S
you want to configure the S
USTAIN
P
EDAL
input. There are
two options:
1. If you’re using a single sustain pedal in the S
USTAIN
P
EDAL
input you may want to use it for sustain with
Piano sounds and as a Rotor Speed switch with Organ
sounds. In this case, select ‘P.t’ (Pedal toggle) with
the U
sounds. In this case, select ‘P.t’ (Pedal toggle) with
the U
P
/D
OWN
N
AVIGATOR
buttons. Press any button
(except for the S
HIFT
, S
TORE
or U
P
/D
OWN
buttons)
to exit.