Canon MF4570dn Guida Utente

xi

 In order to use this machine in a safe and trouble-free manner, install the machine in a place that fulfills the following conditions. 
Also, read the remarks carefully. 

•   Temperature range: 50 to 86°F (10 to 30°C) 
•   Humidity range: 20 to 80 % RH (no condensation) 

•   To prevent condensation from forming inside the machine 

in the following cases, let the machine adjust to the 
ambient temperature and humidity for at least two hours 
before use. 

 

-  When the room where the machine is installed is heated 

rapidly 

 

-  When the machine is moved from a cool or dry location 

to a hot or humid location 

•   If water droplets (condensation) form inside the machine, 

this can result in paper jams or poor print quality. 

 When you are using an ultrasonic humidifier, it is therefore 
recommended that you use purified water or other water that 
is free of impurities. 
 If you use tap water or well water, impurities in the water will 
be dispersed through the air. This can be trapped inside the 
machine, causing degradation in print quality. 

 120 to 127 V 60 Hz 

•   Do not connect this machine to an uninterruptible power 

source. 

•   Use an AC power outlet exclusively for the machine. Do not 

use the other sockets of the AC power outlet. 

•   Do not plug the power plug into the auxiliary outlet on a 

computer. 
 Do not use the same AC power outlet for both the machine 
and any of the following equipment. 

 

-  Copy  machine 

 

-  Air  conditioner 

 

-  Shredder 

 

-  Equipment that consumes a large amount of electricity 

 

-  Equipment that generates electrical noise 

•   When unplugging the power cord, keep interval of 5 

seconds or more before plugging it again. 

•   The maximum power consumption of the machine is 

1,090 W or less. 

•   Electrical noise or a dramatic drop in mains voltage may 

cause the machine or computer to operate incorrectly or 
lose data. 

•   A location with sufficient space 
•   A location with good ventilation 
•   A location with a flat, even surface 
•   A location able to fully support the weight of the machine 

•   A location subject to dramatic changes in temperature or 

humidity 

•   A location subject to condensation 
•   A poorly ventilated location 

 (If you use the machine for a long time or to perform a large 
amount of printing in a poorly ventilated room, the ozone 
or other odors generated by the machine may create an 
uncomfortable working environment. In addition, chemical 
particles are dispersed during printing; therefore, it is 
important to provide adequate ventilation.) 

•   A location near equipment that generates magnetic or 

electromagnetic waves 

•   A laboratory or location where chemical reactions occur 
•   A location exposed to salt air, corrosive gases, or toxic gases 
•   A location, such as on a carpet or mat, that may warp from 

the weight of the machine or where the machine is liable 
to sink. 

 Required installation space 
  

 

31 5/8" (804 mm)

4" (100 mm)

4" (100 mm)

4"

(100 mm)

4"

(100 mm)

24 1/4"

(617 mm)

29"

(735 mm)

4" (100 mm)

Paper

cassette

Feeder
cover