Canon MF4570dn Guida Utente
6-2
U
sing the F
ax F
unc
tions
Basic Method for Sending Faxes
This section describes the basic procedure for sending faxes.
1
Place documents.
→P.2-4)
→P.2-2)
2
Press [
].
4
Specify the destination.
These are the following methods to specify a destination.
(For details, see P.6-4 to 6-5.)
(For details, see P.6-4 to 6-5.)
Entering the fax number
One-touch keys
Coded dialing
Group dialing
Address book
- Sequential broadcast
- Sequential broadcast
(
→P.6-9)
5
Press [
] (Start).
When placing documents in the feeder
Document scanning is started. The fax is sent when the scanning is
finished.
When placing documents on the platen glass
Perform the following procedure.
(1) Press [
Document scanning is started. The fax is sent when the scanning is
finished.
When placing documents on the platen glass
Perform the following procedure.
(1) Press [
] or [
] to select the size of the original document,
and then press [OK].
(2) Press [
] (Start) for each document.
(3) When all documents are scanned completely, select <Start
Sending>, and then press [OK].
3
Set scanning settings for documents as needed.
There are the three items you can specify.
(For details, see P.6-3.)
(For details, see P.6-3.)
Image Quality Settings
Density Settings
Sharpness Settings
The settings specified here are effective only for the
current sending operation. To make the settings
effective for all the fax operations, see “Changing the
Default Values for Fax” (
current sending operation. To make the settings
effective for all the fax operations, see “Changing the
Default Values for Fax” (
→P.6-18).