Canon MP560 Manuale Supplementare

A

A

Cannot connect. Multiple access points are enabled. is Displayed

The message appears when multiple access points are 

detected.

Check the access point settings, then configure WPS 

settings again.

For details on how to check the settings of the access point, 

refer to the manual supplied with the access point or contact its 

manufacturer.

•

The message appears when an error occurs.

Connection failed. is Displayed

Wait for a while, then configure the settings again.

For the procedure to configure WPS settings of the machine, refer 

to "Wireless Setup Using WPS (Wi-Fi Protected Setup)" on page 

24 in the printed manual: 

Getting Started.

•

When using an access point that does not support WPS, configure settings manually. For the 

procedure to configure settings of the machine manually, refer to "Wireless Setup" on page 19 in 

the printed manual: 

Getting Started.

•

The Machine is Not Displayed (Detected)

Is the machine connected to a network?

For details on how to check if the machine is connected to a network, refer to "Confirm Connection 

Status" on page 27 in the printed manual: 

Getting Started.

•

Make sure that you follow "Connection Checklist" on page 11, then click 

Update (A).

If the machine is not connected to a network, perform setup again by following the 

procedures in "Wireless Setup" on page 19 and onward in the printed manual: 

Started.

Is the IP filtering feature enabled on the access point?

Set the access point to accept the IP address of the machine.

For details on how to check the settings of the access point, refer to the manual supplied with the 

access point or contact its manufacturer.

•

For details on how to change the settings of the access point, refer to the manual supplied with the 

access point or contact its manufacturer.

•

To check the IP address of the machine, press the 

HOME button, then using the Easy-Scroll 

Wheel and 

OK button, select Settings > Device settings > LAN settings > Confirm LAN 

settings > Wireless LAN setting list, then check IP address.

•