Canon MP560 Manuale Supplementare

A

Check Printer Settings dialog box is displayed

The message appears when the machine cannot be 

detected.

Is the machine connected to a network?

For details on how to check if the machine is connected to a network, refer to "Confirm Connection 

Status" on page 27 in the printed manual: 

Getting Started.

•

Make sure that you follow "Connection Checklist" on page 

11, then click 

Back (A).

Proceed with the setup.

If the machine is not connected to a network, perform setup again by following the 

procedures in "Wireless Setup" on page 19 and onward in the printed manual: 

Started.

Is the IP filtering feature enabled on the access point?

For details on how to check the settings of the access point, refer to the manual supplied with the 

access point or contact its manufacturer.

•

Set the access point to accept the IP address of the machine.

For details on how to change the settings of the access point, refer to the manual supplied with the 

access point or contact its manufacturer.

•

To check the IP address of the machine, press the 

HOME button, then using the Easy-Scroll 

Wheel and 

OK button, select Settings > Device settings > LAN settings > Confirm LAN 

settings > Wireless LAN setting list, then check IP address.

•

Is the privacy separator feature enabled on the access point?

Disable the privacy separator feature.

For details on how to change the settings of the access point, refer to the manual supplied with the 

access point or contact its manufacturer.

•

For details on how to check the settings of the access point, refer to the manual supplied with the 

access point or contact its manufacturer.

•

When obtaining an IP address automatically, make sure that the DHCP function of the 

access point is active.

For details on how to check the settings of the access point, refer to the manual supplied with the 

access point or contact its manufacturer.

•

Enable the DHCP function of the access point, then click 

Update (A).

For details on how to change the settings of the access point, refer to the manual supplied with the 

access point or contact its manufacturer.

•

A function to control traffic to/from specific IP addresses.

A function to prevent communication between multiple wireless devices connected to an access point.

A function that automatically assigns required information (IP address, etc.) to computers connected to 

the Internet.