Canon MP560 Manuale Supplementare

Select 

Directly enter the access point name, then 

press the 

OK button.

If you are living in an apartment, nearby access points in use 

may be detected.

•

Enter the access point name/network name (SSID) 

using the Easy-Scroll Wheel, then press the 

OK button.

For details on how to check the access point name/network 

name (SSID), refer to the manual supplied with the access 

point or contact its manufacturer.

•

Enter the same access point name/network name (SSID) as 

that of the access point on the machine.

•

Enter upper and lower case letters of the alphabet correctly. Letters are case sensitive.

•

Go to either of the following steps according to the selected 

security protocol.

•

Disable

WEP

WPA/WPA2

Select a security protocol for the access point, then 

press the 

OK button.

When 

WEP 40 bit is selected in AirPort Utility (AirPort Admin Utility), select WEP (64 bit).

•

When 

WEP (Transitional Security Network) is selected in AirPort Utility, select WEP (128 

bit) or WPA2-PSK (AES).

•

Use the Easy-Scroll Wheel to select the character. Use the ] 

button to move the cursor to the right.

Select 

Easy settings, then press the OK button.

Select 

Yes, then press the OK button.

Select 

Wireless LAN setup, then press the OK button.

Use the Easy-Scroll Wheel to select 

Settings, then 

press the 

OK button.

Enter the access point name/network name (SSID) and security setting (WEP, WPA, 

etc.) on the machine directly. 

Follow the procedure below.

When wireless connection is enabled, the 

Wi-Fi lamp lights 

blue.

•

Entering the Access Point's Wireless LAN Settings Directly on the 

Machine