Canon S200 Guida All'Installazione Rapida
6
Basic Printing
To load envelopes:
1.
Open the front cover and set the paper thickness lever to the envelope mark.
Close the cover.
Close the cover.
2.
Slide the paper feed guide to the left.
3.
Press down on the corners
and sides of the envelopes to
make them as flat as possible
by expelling all of the air.
and sides of the envelopes to
make them as flat as possible
by expelling all of the air.
To avoid paper jams, make
sure envelopes are flat before
you load them into the
paper tray.
sure envelopes are flat before
you load them into the
paper tray.
4.
With the address side facing down
and pointed in
the direction shown in the illustration, align the
stack with the right side of the paper rest, then
insert the stack into the printer.
stack with the right side of the paper rest, then
insert the stack into the printer.
5.
Slide the paper guide to the edge of the
envelopes until it is firmly in place.
envelopes until it is firmly in place.
Make sure that none of the flaps overlap. If the envelope edges
are not flat, crease them with the side of a pen.
are not flat, crease them with the side of a pen.
Do not allow more than 5 envelopes to stack on the paper output tray.
When printing envelopes, be sure to
select Envelope as the Media Type
on the Main tab of the Properties
window. For more information, see
page 9 (Windows) or page 11
(Mac OS) of this guide, or refer to the
select Envelope as the Media Type
on the Main tab of the Properties
window. For more information, see
page 9 (Windows) or page 11
(Mac OS) of this guide, or refer to the
S200 User’s Guide
on the Setup
Software & User’s Guide CD-ROM.
Flap side of envelope faces up
S200 QS.book Page 6 Tuesday, September 18, 2001 9:02 AM