Canon S200 Guida All'Installazione Rapida

 

Basic Printing

 

The S200 can print on paper ranging from standard 
copier paper (usually 17–28 lb.) to specialty media 
paper and envelopes.

The paper thickness lever is located inside the front 
cover, on the printhead holder. It controls the paper 
feed for the type and weight of the media on which 
you are printing.

 For envelopes (see “To load envelopes:” on 

page 6), banners and T-Shirt Transfers.

 

For regular paper and other media with a left position in the table (see 
“Load Limit and Paper Thickness Lever Position” on page 4).

Use the chart on the previous page to ensure that the paper thickness lever is set 
correctly for the type of media you are using.

 

1.

 

Make sure the paper thickness lever is set 
correctly for the media used.

 

2.

 

Slide the paper guide completely to the left.

 

3.

 

Fan the edges of the sheets to remove static 
cling and avoid paper jams, then tap the 
edges of the stack against a flat surface so 
the stack is aligned.

 

4.

 

Insert the media into the paper rest, with the 
print side facing up.

 

5.

 

Slide the paper guide to the edge of the media until it is firmly in place.

Some papers, especially specialty media, have specific sides for 
printing. The print side is usually the glossier side or the brighter 
white side. When using specialty media, do not touch the print side.

You can load up to 50 sheets of plain (17 lb.) paper or 40 sheets 
of Canon High Resolution Paper in the paper rest at one time. 
Never load the paper above the load limit mark.

Load limit mark

Print side

 

S200 QS.book  Page 5  Tuesday, September 18, 2001  9:02 AM