Disc Makers autograph iv Guida Utente

10 Ink Cartridges and Printable CDs

7. Push the cartridge back until it snaps into place.

8. Close the printers front cover.
9. Go back to the printer driver setup window and click on

either the New Cartridge Installed or the Old Cartridge

Installed button to indicate whether you installed a fresh,

new cartridge or simply switched between a previously

used color cartridge and a previously used monochrome

cartridge. The cartridge carrier will return to its home

position. See Section 3-D for more information on these

buttons.
Alternately, you may use the Ink Cartridge button; to

indicate a previously used cartridge simply press the

button and release quickly. If you have installed a fresh

new cartridge, press and hold the button until the cartridge

returns to its home position.

NOTE: When you choose New Cartridge, the ink levels are cleared and the

ink level indicator should go back to full capacity (for either color or

monochrome).

If you use the Ink Cartridge button, the ink levels are cleared by

pressing and holding the button until the two green LEDs flash and

the cartridge returns to its home position.

NOTE: Front door must be closed for printer to recognize the cartridge.

510132r2.qxd 5/30/2001 12:53 PM Page 10

TOC

INDEX