Disc Makers autograph iv Guida Utente

Using the CD Color Printer IV with Windows 11

Section 3: Using the CD Color

Printer IV with Windows

A. CONNECTING THE PRINTER TO YOUR COMPUTER

The CD Color Printer IV is designed to be used with nearly any

IBM-PC

or compatible running Windows 2000/XP, or

Windows 95/98/Me.
The printer is equipped with a standard 8-bit Centronics-type

parallel port

. This port is the means through which it receives

data from your computer. To connect the printer to your

computer, simply obtain a shielded, bi-directional parallel

cable, and refer to the following steps:

NOTE: For faster printing, your computer’s parallel port mode should be set

to ECP. If you experience problems with this setting or if your

computer’s parallel port is not ECP compatible, set your computer’s

parallel port to the standard “Printer Port” setting. Refer to your

computer’s system documentation for instructions on checking and/or

changing the parallel port mode.

1. Connect the Centronics-type parallel side of the cable to the

printer. Snap the fastening clips into place.

2. Connect the other side to the back of your computer at

LPT1, LPT2, or the PARALLEL connector.

510132.qxd 11/15/01 4:04 PM Page 11

TOC

INDEX