Intel SC5650BCDP Manuale Utente
Intel
®
Server System SC5650BCDP TPS
Peripheral and Hard Drive Support
Revision 1.5
Intel order number: E80367-002
33
5. Peripheral and Hard Drive Support
The following sections describe the components shown in the figure below:
Figure 13: Front View Components (without Front Bezel Assembly)
Table 30: Front View Components Reference
Description
A
5.25-in Device Drive Bays
B
3.5-in Device Drive Bay
C
Hard Drive Cage
D
Drive Bay EMI Shield (shown open)
E
Front Panel USB Ports
5.1 3.5-in Peripheral Drive Bay
Intel
®
Server System SC5650BCDP supports one 3.5-in removable media peripheral, such as a
tape drive, below the 5.25-in peripheral bays. The bezel must be removed prior to installing a
3.5-in removable media devise. When a drive is not installed, a snap-in EMI shield must be in
place to ensure regulatory compliance. Cosmetic plastic filler is provided to snap into the bezel.
3.5-in removable media devise. When a drive is not installed, a snap-in EMI shield must be in
place to ensure regulatory compliance. Cosmetic plastic filler is provided to snap into the bezel.
The 3.5-in bay is designed for tool-less insertion and removal so that no screws are required.
On the right side of the chassis, two protrusions in the sheet metal help locate the drive. On the
left side are two levers to lock the drive into place.
On the right side of the chassis, two protrusions in the sheet metal help locate the drive. On the
left side are two levers to lock the drive into place.
5.2 5.25-in Peripheral Drive Bays
Intel
®
Server System SC5650BCDP supports two half-height 5.25-in removable media
peripheral devices, such as a magnetic/optical disk, DVD/CD-ROM drive, or tape drive. These