Intel SC5650BCDP Manuale Utente
Intel
®
Server System SC5650BCDP TPS
Power Sub-System
Revision 1.5
Intel order number: E80367-002
21
The remote sense return (ReturnS) is able to regulate out a minimum of 200mV drop in the
power ground return. The current in any remote sense line is less than 5mA to prevent voltage
sensing errors. The power supply operates within specification over the full range of voltage
drops from the power supply’s output connector to the remote sense points.
power ground return. The current in any remote sense line is less than 5mA to prevent voltage
sensing errors. The power supply operates within specification over the full range of voltage
drops from the power supply’s output connector to the remote sense points.
3.1.5.5
Power Module Output Power / Currents
The following table defines power and current ratings for this 600W power supply. The
combined output power of all outputs does not exceed the rated output power. Below are load
ranges for each of the two power supply power levels. The power supply meets both static and
dynamic voltage regulation requirements for the minimum loading conditions.
combined output power of all outputs does not exceed the rated output power. Below are load
ranges for each of the two power supply power levels. The power supply meets both static and
dynamic voltage regulation requirements for the minimum loading conditions.
Table 18. Load Ratings
Load Range 1 (Maximum System Loading)
Voltage
Minimum
Continuous Load
Maximum Continuous
Load
1, 3
Peak Load
2, 4, 5
+3.3V
6
1.5 A
20 A
+5V
6
5.0 A
24 A
+12V1
1.5 A
15 A
18 A
+12V2
1.5 A
15 A
18 A
+12V3
1.5 A
16 A
18 A
+12V4
1.5 A
16 A
18 A
-12V
0 A
0.5 A
+5VSB
0.1 A
2.0 A
Load Range 2 (Light System Loading)
Voltage Minimum
Continuous Load
Maximum
Continuous Load
Peak Load
5
+3.3V
6
0.5 A
9.0 A
+5V
6
2.0 A
7.0 A
+12V1
0.5 A
5.0 A
7.0 A
+12V2
0.5 A
5.0 A
7.0 A
+12V3
2.0 A
6.0 A
+12V4
0.5 A
5.0 A
-12V
0 A
0.5 A
+5VSB
0.1 A
2.0 A
Notes:
A.
Maximum continuous total DC output power should not exceed 600 W.
B.
Peak load on the combined 12-V output shall not exceed 48 A.
C.
Maximum continuous load on the combined 12-V output shall not exceed 43 A.
D.
Peak total DC output power should not exceed 660 W.
E.
Peak power and peak current loading shall be supported for a minimum of 12
seconds.
F.
Combined 3.3V/5V power shall not exceed 140 W.