Nortel 4000 Guida Utente
4-43
Chapter 4 Setting Up RACs
Managing Remote Access Concentrators Using Annex Manager
Remote Address
Remote addressing is not available from the Setup menu for the 5393/
6300, 5399, and 8000. For these devices use the
6300, 5399, and 8000. For these devices use the
Remote Addressing
box in
the
PPP Dial Access
window. See The PPP Dial Access Window on page
4-39 for instructions.
To configure RACs for remote addressing:
1.
Create a RAC list and select the RACs you want to configure
(page 2-1).
(page 2-1).
2.
In the
Main
window, select
Remote Address
from the
Setup
field at
the top of the window or click
Setup
and then select
Remote
Address
.
The
Remote Address
window appears (
). This window
is described in Remote Address Window on page 4-44.
Figure 4-14. Remote Address Window
3.
Enter the
First Remote Address
and
Subnet Mask
address as
required. Annex Manager fills in the
Last Remote Address
field.
W
ARNING