Nortel 4000 Guida Utente

Managing Remote Access Concentrators Using Annex Manager

Appendix A    RAC Parameters

A-14

defines the default session mode when the DECServer command interface is
configured (i.e., when

CallDef_cli_interface

 is set to

vci

). For more information,

refer to the Annex Interface for VMS Environments Administrator’s Guide.

allows a RAC or an ISDN Primary Rate RAC to search the

acp_dialup

 file for the

user name of the remote client and to set local and remote addresses. This
parameter applies only when the

CallDef_mode

 parameter is set to

slip

 or

ppp.

•

acp_dialup

:

–

If the file contains a matching user name and:

•

The local and remote addresses exist in the

acp_dialup

file, the RAC uses those values.

•

The the

acp_dialup

 file contains a remote address but

not a local address, the RAC uses the remote address
from the file and the RAC IP address for the local
address.

–

If the file does not contain a matching user name, the RAC
uses values from the

local_address

 and

remote_address

parameters:

•

If both parameters contain addresses, the RAC uses
these values.

•

If both parameters are set to

 0.0.0.0

, the RAC negotiates

for both addresses with the remote PPP client. The
connection is denied for a remote SLIP client.

•

If

local_address

 contains a value and

remote_address

 is

set to

0.0.0.0

, the RAC uses the local address and

negotiates with the remote PPP client for the remote
address. The connection is denied for a remote SLIP
client.

Type

RAC

Values

interactive, passthru, passall, transparent

Default

interactive

Lists

RAC Only, Call Defaults