Руководство Пользователя для Nortel 4000
Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
A-14
CallDef_def_session_
mode
mode
defines the default session mode when the DECServer command interface is
configured (i.e., when
configured (i.e., when
CallDef_cli_interface
is set to
vci
). For more information,
refer to the Annex Interface for VMS Environments Administrator’s Guide.
CallDef_dialup_
address_origin
address_origin
allows a RAC or an ISDN Primary Rate RAC to search the
acp_dialup
file for the
user name of the remote client and to set local and remote addresses. This
parameter applies only when the
parameter applies only when the
CallDef_mode
parameter is set to
slip
or
ppp.
•
acp_dialup
:
–
If the file contains a matching user name and:
•
The local and remote addresses exist in the
acp_dialup
file, the RAC uses those values.
•
The the
acp_dialup
file contains a remote address but
not a local address, the RAC uses the remote address
from the file and the RAC IP address for the local
address.
from the file and the RAC IP address for the local
address.
–
If the file does not contain a matching user name, the RAC
uses values from the
uses values from the
local_address
and
remote_address
parameters:
•
If both parameters contain addresses, the RAC uses
these values.
these values.
•
If both parameters are set to
0.0.0.0
, the RAC negotiates
for both addresses with the remote PPP client. The
connection is denied for a remote SLIP client.
connection is denied for a remote SLIP client.
•
If
local_address
contains a value and
remote_address
is
set to
0.0.0.0
, the RAC uses the local address and
negotiates with the remote PPP client for the remote
address. The connection is denied for a remote SLIP
client.
address. The connection is denied for a remote SLIP
client.
Type
RAC
Values
interactive, passthru, passall, transparent
Default
interactive
Lists
RAC Only, Call Defaults