Nortel 4000 Guida Utente
Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
A-44
dialup_address_origin
allows a RAC to search the
acp_dialup
file for the user name of the remote client
and set local and remote addresses. This parameter applies only when the
mode
parameter is set to
slip
,
ppp
, or
autodetect.
•
acp_dialup
:
–
If the file contains a matching user name and:
•
The local and remote addresses exist in the
acp_dialup
file, the RAC uses those values.
•
The the
acp_dialup
file contains a remote address but
not a local address, the RAC uses the remote address
from the file and the RAC IP address for the local
address.
from the file and the RAC IP address for the local
address.
–
If the file does not contain a matching user name, the RAC
uses values from the
uses values from the
local_address
and
remote_address
parameters:
•
If both parameters contain addresses, the RAC uses
these values.
these values.
•
If both parameters are set to
0.0.0.0
, the RAC negotiates
for both addresses with the remote PPP client. The
connection is denied for a remote SLIP client.
connection is denied for a remote SLIP client.
•
If
local_address
contains a value and
remote_address
is
set to
0.0.0.0
, the RAC uses the local address and
negotiates with the remote PPP client for the remote
address. The connection is denied for a remote SLIP
address. The connection is denied for a remote SLIP
client.
Type
Async
Values
enabled or disabled
Default
disabled
Lists
Async Port, PPP, SLIP