Nortel 4000 Guida Utente
A-45
Appendix A RAC Parameters
Managing Remote Access Concentrators Using Annex Manager
disabled_modules
allows you to disable individual modules to free memory space. If you enter
more than one module, separate module names using commas. You can enter
more than one module, separate module names using commas. You can enter
admin
,
edit
,
fingerd
,
ftpd
,
lat
,
nameserver
,
ppp
,
slip
,
snmp
,
vci
,
all
, or
none
.
Disabling
snmp
prevents access to the RAC from Annex Manager.
Disabling
admin
and
snmp
can cause problems if host-based
na
is not
available. To change parameters in this case, you must return to
monitor mode, erase the parameters in non-volatile memory, and
reconfigure the RAC.
monitor mode, erase the parameters in non-volatile memory, and
reconfigure the RAC.
do_compression
starts TCP/IP header compression on a SLIP link. When you choose
enabled
,
the RAC negotiates for TCP/IP compression for both sides of the connection.
dsx1fdl
describes the facilities data link use. This allows the telephone company to read
the statistics maintained by a RAC and to perform diagnostic tests.
the statistics maintained by a RAC and to perform diagnostic tests.
dsx1LineCoding
selects the line code format used on the T1/E1 network interface. Must match
the codes supplied by the telephone company.
the codes supplied by the telephone company.
Type
RAC
Values
admin, edit, fingerd, ftpd, lat, nameserver, ppp, slip, snmp,
vci, all, none
vci, all, none
Default
vci
Lists
RAC Only, Basic RAC
Type
Async
Values
enabled or disabled
Default
disabled
Lists
Async Port, PPP, SLIP
Type
WAN Module
Values
ANSI, ATT
Default
ATT
Lists
DS1 Line, T1_DS1, PRI _Line
Type
WAN Module
Values
B8ZS, AMI
Default
B8ZS
Lists
DS1 Line, T1_DS1