Nortel 4000 Guida Utente
Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
A-56
line_erase
allows a RAC using CLI to echo line erase for a video terminal. If you choose
enabled
, the RAC erases all characters on the line and moves the cursor back to
the beginning of the line. If you choose
disabled
, it echoes the line erase character
for hard-copy terminals, making the deleted line visible and positioning the print
head at the beginning of the next line.
head at the beginning of the next line.
load_broadcast
defines, during a boot, whether the RAC requests the configuration or message-
of-the-day files from other hosts. This parameter works only if the files are not
available on the preferred load host.
of-the-day files from other hosts. This parameter works only if the files are not
available on the preferred load host.
load_dump_gateway
specifies the gateway IP address. A gateway is required if the preferred load or
dump host is on a different network or subnet than the RAC.
dump host is on a different network or subnet than the RAC.
Type
Async
Values
enabled or disabled
Default
enabled
Lists
Async Port, Command Line Editing
Type
RAC
Values
enabled or disabled
Default
enabled
Lists
RAC Only, Basic_RAC
Type
RAC
Values
IP address
Default
0.0.0.0 (no gateway)
Lists
RAC Only, Basic RAC