Nortel 4000 Guida Utente
![Nortel](https://files.manualsbrain.com/attachments/41d8158aa9dad39109585817452a5513bedfdded/common/fit/150/50/b0df237683acfcba182fca1886fb0237fc1e06fba6e3e77a0d64d1463e4c/brand_logo.jpeg)
A-57
Appendix A RAC Parameters
Managing Remote Access Concentrators Using Annex Manager
load_dump_sequence
specifies available network interfaces and the order in which they are used for a
down-line load or an up-line dump. You can list more than one interface by using
commas to separate interface names. You can enter:
down-line load or an up-line dump. You can list more than one interface by using
commas to separate interface names. You can enter:
•
net
to specify a local area network.
•
sl + port number
(e.g.,
sl2
) to specify a SLIP line. If you enter
sl
and a port number, you must enter an address in the
slip_load_dump_host
parameter.
•
self
to instruct a RAC to boot its image from the Flash ROMs.
Since the RAC cannot dump back to itself, you should include
a secondary interface here by entering
a secondary interface here by entering
self, net
or
self,sl+port
number.
local_address
defines the IP address for the port on the RAC side of the link. This IP address
is used only when
is used only when
mode
is set to
slip
,
ppp,
or
autodetect
.
location
defines a port location or description that displays at the CLI
who
command.
lock_enable
allows any port to use the DECServer LOCK command.
Type
RAC
Value
net, sl+ port number, self
Default
net
Lists
RAC Only, Basic RAC
Type
Async
Values
IP address
Default
0.0.0.0
Lists
Async Port, PPP, SLIP
Type
Async
Values
0 to 16 characters
Default
“ “ (null string)
Lists
Async Port, Basic Async Port
Type
RAC
Values
enabled or disabled
Default
disabled
Lists
RAC Only, Security