Nortel 4000 Guida Utente
Managing Remote Access Concentrators Using Annex Manager
Chapter 2 Creating and Using RAC Lists
2-2
To create a RAC list:
1.
In the
Main
window, enter a RAC name or IP address in the
Annex
field (
).
You can enter a RAC name or its IP address. If you add a RAC to
this list using one identifier (e.g., a name) and repeat the process
using the other identifier (e.g., the IP address) for the same RAC,
a message informs you that the RAC is already included in the list.
this list using one identifier (e.g., a name) and repeat the process
using the other identifier (e.g., the IP address) for the same RAC,
a message informs you that the RAC is already included in the list.
If you enter a device with which Annex Manager cannot
communicate using SNMP,
communicate using SNMP,
NOT REACHABLE
displays in place of
the RAC type. If you enter a device name that responds to SNMP
but is not a RAC, or if you enter the name of an unknown device,
a warning message informs you that the device cannot be added to
the list.
but is not a RAC, or if you enter the name of an unknown device,
a warning message informs you that the device cannot be added to
the list.
Figure 2-2. An Annex List in the Main Window
2.
Enter the RAC SNMP community string in the
Community
field.
The default string for the RAC is
public
. This string appears
automatically if you do not complete this field.
If you enter a valid RAC name and an incorrect SNMP
community string, the RAC appears in the list as
community string, the RAC appears in the list as
NOT
REACHABLE
.
3.
Click
Add
or press Enter.
The RAC name appears in the list box. All names appear in the
order in which you enter them.
order in which you enter them.