Intermec cn30 Guida Utente

A profile contains all the information necessary to authenticate you to the 
network, such as login name, password or certificate, and protocols by 
which you are authenticated.

You can have up to four profiles for different networks. For example, you 
may have different login names or passwords on different networks, or you 
may use a password on one network, and a certificate on another.

Use the Profiles page to select and configure between the networking envi-
ronments assigned to this 802.11b/g radio.

Use the Basic page to set the network type, name, and manage battery 
power for this profile. Tap ok to return to the Profiles page.

To start 802.11b/g communications on the CN30 Computer, tap Start > 
Settings > the System tab > the Wireless Network icon to access the Profile 
Wizard for the 802.11b/g radio module.

Profile

Tap the drop-down list to choose between four different profiles assigned to this unit, then 
tap Edit Select Profile, make the changes needed for this profile (starting on the next page), 
then tap ok to return to the Profiles page.

Enable Microsoft's 
Wireless Zero Config

Check this to enable Microsoft's Wireless Zero Config application and disable the Intermec 
software solution for 802.11b/g, including configuration via the Wireless Network applet.