Intermec cn30 Guida Utente

If you had set Association to “Shared,” then select a data transmission 
key from the Data TX Key drop-down list near the bottom of this 
screen, then enter the encryption key for that data transmission in the 
appropriate Key # field.

To enable WPA encryption using a pre-shared key:

Set 8021x Security as “None.”

Set Association to “WPA.” Skip Encryption as it is automatically set to 
“TKIP.”

Enter the temporal key as ASCII (12345) in the Pre-Shared Key field.

To enable WPA2 encryption using a preshared key:

Set 8021x Security as “None.”

Set Association to “WPA2.”

Set Encryption to either “TKIP” or “AES.”