SATO CG412 Guida Utente
Section 7: Interface Specifications
Page 7-14
CG4 Series Operator Manual
7.5 LOCAL AREA NETWORK (LAN) ETHERNET (cont’d)
7.5.6 TELNET Specifications
TELNET complies with RFC854. This consists of an interactive menu form, and it enables you to change and
refer internal setup and to display status. To change the setting details, enter 'root' user name and password
at the time of login. Default ROOT password is set to null (line feed only).
refer internal setup and to display status. To change the setting details, enter 'root' user name and password
at the time of login. Default ROOT password is set to null (line feed only).
Each printer model name will appear in [Model Name].
For the detailed settings of [1:Setup TCP/IP], refer to Section 7.5.7 Setting/Displayed Items.
For the detailed settings of [1:Setup TCP/IP], refer to Section 7.5.7 Setting/Displayed Items.
7.5.7 Setting/Displayed Items
The following table shows the settings and referable sections as well as various variables.
TCP/IP related settings
Variable identifier
Default (Factory setting)
Setting range
IP address
0.0.0.0 (Externally obtained)
0.0.0.0 ~ 255.255.255.255
Subnet mask
0.0.0.0 (Derived from IP address)
0.0.0.0 ~ 255.255.255.255
Gateway address
0.0.0.0 (Invalid)
0.0.0.0 ~ 255.255.255.255
RARP protocol
ENABLE
ENABLE/DISABLE
DHCP protocol
ENABLE
ENABLE/DISABLE
Keep alive time
180(sec)
30 ~ 300
Socket cancel
Normal
Normal / compatible
ROOT password
NULL (No password)
Up to 16 random alphanumeric
characters
characters
<TELNET command example>
In MS-DOS command prompt, type in [TELNET xxx.xxx.xxx.xxx (IP address)] and enter
user name and password to advance to the display below.
user name and password to advance to the display below.
SATO PRINTER ModelName TELNET server.
Copyright
Copyright
2006(C)
SATO
Corporation.
login:
root
‘root’
user
needs
password
to
login
password:
User
User
‘root’
logged
in
No. Item Value (level.1)
----------------------------------------------------------
1
:
Setup
TCP/IP
2
:
Display
status
99
:
Exit
setup
Please
select(1-99)?