SATO CG412 사용자 가이드

Section 7: Interface Specifications

Page 7-14

TELNET complies with RFC854. This consists of an interactive menu form, and it enables you to change and 
refer internal setup and to display status. To change the setting details, enter 'root' user name and password 
at the time of login. Default ROOT password is set to null (line feed only).

Each printer model name will appear in [Model Name].
For the detailed settings of [1:Setup TCP/IP], refer to Section 7.5.7 Setting/Displayed Items.

The following table shows the settings and referable sections as well as various variables.

TCP/IP related settings 

Variable identifier

Default (Factory setting)

Setting range

IP address

0.0.0.0 (Externally obtained)

0.0.0.0 ~ 255.255.255.255

Subnet mask

0.0.0.0 (Derived from IP address)

0.0.0.0 ~ 255.255.255.255

Gateway address

0.0.0.0 (Invalid)

0.0.0.0 ~ 255.255.255.255

RARP protocol

ENABLE

ENABLE/DISABLE

DHCP protocol

ENABLE

ENABLE/DISABLE

Keep alive time

180(sec)

30 ~ 300

Socket cancel

Normal

Normal / compatible

ROOT password

NULL (No password)

Up to 16 random alphanumeric 
characters

<TELNET command example> 

In MS-DOS command prompt, type in [TELNET xxx.xxx.xxx.xxx (IP address)] and enter
user name and password to advance to the display below. 
 

      SATO PRINTER ModelName TELNET server. 
   Copyright 

2006(C) 

SATO 

Corporation. 

 
   login: 

root 

   ‘root’ 

user 

needs 

password 

to 

login 

   password: 
   User 

‘root’ 

logged 

in 

 
        No.    Item                                            Value                        (level.1) 
   ---------------------------------------------------------- 
     1 

: 

Setup 

TCP/IP 

     2 

: 

Display 

status 

    99 

: 

Exit 

setup 

   Please 

select(1-99)?