Fedders hfc1009n2f Guida Al Funzionamento

16

SETTINGS

Allows you to save current preferred set-
tings into memory and reactivate them
with one button. 

•  Press the Power On/Off button to turn on

the unit

•  Press the Mode button and select the

desired operation mode, temperature and
vane position

•  Press the Smart Air button twice to save

the setting into memory. The display will
show “IF”. 

•  To recall the saved setting, press the Smart

Air button once. There will be a five sec-
ond delay before the stored setting begins.

You can direct the air flow from your air
conditioner into the room using the Swing
button. You can also continuously sweep
the air up and down.

•  Turn on your air conditioner by pressing on

the Power On/Off button on the remote
control

•  Press the Swing button to move the air

outlet adjustable louver between
horizontal and vertical positions

The default setting  for cool and

dehumidify modes is horizontal and for
heat mode the default setting is vertical.

While the unit is running, press the Fan
Speed button to set the fan speed on low,
medium, high or auto.

When the auto fan setting is selected while
the air conditioner is in Cool mode, the fan
speeds will change automatically as the
temperature in the room changes

The fan setting is not applicable to 

Dehumidify mode.  

The chart below identifies the different fan
speeds as they are displayed on the remote con-
trol and the indoor unit. 

Air outlet
adjustable louver