Revel ic65 Guida Utente
11
Revel Concerta IW65 & IC65/IC80
Owner’s Manual
Cut the drywall along the speaker
template marks made in Step 2.
template marks made in Step 2.
4. Connect the speaker wires to the
speaker. Ensure that the polarity of
each connection is correct.
each connection is correct.
5. Ensure that all four locking tabs are
properly positioned against the
locking tab stops, located on the
speaker frame.
locking tab stops, located on the
speaker frame.
Carefully place the frame assembly
into the wall, ensuring that there is no
more than 1/8-inch play between the
frame and the wall cutout.
into the wall, ensuring that there is no
more than 1/8-inch play between the
frame and the wall cutout.
After positioning the speaker into the
mounting location, back each screw
out one full turn counterclockwise.
mounting location, back each screw
out one full turn counterclockwise.
6. Screw down
each of the four
Phillips-head
screwdrivers,
alternating
between the
four screws.
Phillips-head
screwdrivers,
alternating
between the
four screws.
The locking tabs
will swivel into place and secure the
unit to the rear surface of the wall
panel. Hand-tighten with a
non-powered, straight-handle regular
screwdriver only. Ensure that the
speaker is securely held in place and
that all four locking tabs are firmly
resting against the wall panel.
will swivel into place and secure the
unit to the rear surface of the wall
panel. Hand-tighten with a
non-powered, straight-handle regular
screwdriver only. Ensure that the
speaker is securely held in place and
that all four locking tabs are firmly
resting against the wall panel.
Note: Do not use a socket wrench, a
powered screwdriver, a drill, or any other
powered tool.
powered screwdriver, a drill, or any other
powered tool.
7. Attach the metal
grille and logo.
Installation: IC65/IC80
In-Ceiling
In-Ceiling
To add the IC65/IC80 In-Ceiling
loudspeaker to finished construction,
proceed with the following instructions.
loudspeaker to finished construction,
proceed with the following instructions.
CAUTION
Ensure that all system-audio power is OFF
before beginning with the installation.
before beginning with the installation.
1. Remove the plastic paint shield from
the speaker frame.