Revel ic65 Guia Do Utilizador

 

Cut the drywall along the speaker 
template marks made in Step 2.

4. Connect the speaker wires to the 

speaker.  Ensure that the polarity of 
each connection is correct.

5. Ensure that all four locking tabs are 

properly positioned against the 
locking tab stops, located on the 
speaker frame.

Carefully place the frame assembly 
into the wall, ensuring that there is no 
more than 1/8-inch play between the 
frame and the wall cutout.  

After positioning the speaker into the 
mounting location, back each screw 
out one full turn counterclockwise.

6. Screw down 

each of the four 
Phillips-head 
screwdrivers, 
alternating 
between the 
four screws.  

The locking tabs 
will swivel into place and secure the 
unit to the rear surface of the wall 
panel.  Hand-tighten with a 
non-powered, straight-handle regular 
screwdriver only.  Ensure that the 
speaker is securely held in place and 
that all four locking tabs are firmly 
resting against the wall panel.

7. Attach the metal 

grille and logo.

To add the IC65/IC80 In-Ceiling 
loudspeaker to finished construction, 
proceed with the following instructions.

1. Remove the plastic paint shield from 

the speaker frame.