Wasp wpa206 Guida Di Riferimento

10

Wasp WPA206

If a PCMCIA card is inserted into the WPA206 without
previously attaching a Pulling Tag, the card can be
removed by affixing a length of adhesive tape to the
surface of the card and pulling the card out by pulling
outward on the piece of tape.

Pulling Tags simplify the removal of PCMCIA cards from the
WPA206.  Before inserting a PCMCIA card, remove one of the
three Pulling Tags from the Pulling Tag sheet and adhere it to
both sides of the PCMCIA card, leaving a short (approx. ½”) tab.
To remove the PCMCIA card, simply pull outward on this tab.

CAUTION:  Never use anything other than the WPA206’s stylus on
the screen.  Using another object as a stylus could cause perma-
nent damage.

To write data into a field on a form, use the stylus to print the letters
or numbers.  Use very light pressure.

3.

To make a choice from a menu, lightly tap the tip of the stylus on
that choice.

2.

Hold the stylus as you would a pencil.

1.

Front side of PCMCIA card

Find the CF drawer from WPA206 package, insert CF card to
the CF drawer. Then insert the CF drawer to the WPA206 and
place the CF slot door. Re-install the battery door to WPA206
with screw driver of WPA206 stylus.

1.

3

2.

Your CF card.

CF drawer